New Stretcher Contraption
They were originally 2 inches long, with a hole at each end.
Now, hopefully, it will be an effective device!
Once I ran across Tom Hubbard’s web site, I knew exactly what sort of “head-holder” I wanted to be able to stuff the whole assembly into my sweat pants (which I can do — although it’s easier to wear in the “down” position while walking around — it’s fairly bulky to wear in the “up” position while walking around — it’s fairly bulky to wear in the “down” position while walking around — it’s fairly bulky to wear in the “down” position while walking around — it’s fairly bulky to wear in the “up” position while walking around, Here, you can see the notches that I filed into the dowels so that they don’t slip off the metal “pusher brackets” on the base part.
Thanx and keep us posted on the progress with this device.
I DON’T WANT TO BE RESPONSIBLE FOR ANYONE HURTING THEMSELVES!
groa Hey Zeke, Welcome aboard!
NEW: Have added a little more to the description of the base, due to questions from a couple of people.
These are just some standard 1/2 inch “mending braces”.
At the top of the picture, you can see the flat “pusher brackets” that hold up the sticks.
I cut
Once I ran across Tom Hubbard’s web site, I knew exactly what sort of “head-holder” I wanted to use.
With this device there is a distinct danger of putting the “sticks” too close to the head of your penis, and if you do so, realize that it can be done.
I think I would add the foam padding to the dowels and maybe use Groa’s bastard file to kind of get a sweet spot for the top of the shaft where it meets the head.
Maybe for long wearing, some type of foam/tape/padding might be a better choice.
They’re made of 1/2 inch hardwood dowels.
The picture attached to this message shows the bottom side of the sticks.
Hi Everybody, I’ve only been reading about PE for a few weeks now.
It’s made completely of inexpensive parts available from any decent hardware store (I got all the parts at the local ServiStar).
(I’ll add a couple more pictures.
:jumpred:WARNING — AND A “DISCLAIMER”: Please be careful using this device!
So far, this seems to work well, and I really like the feeling of using it.
Don’t get carried away and rip your “willie” off your body!
Also, have added some sketches to the bottom of the sticks.
But, that’s all I had available when I threw this thing together.
This is my first time posting here, so I don’t know if I can attach more than one picture or not.
You can see that I didn’t leave a whole lot of room for the twist-tie.
Seriously — use caution and moderation — stretch safely.
The stretcher described in this thread is capable of generating some really strong stretching forces.
I guess you could get fancy and use stainless steel or brass if you want.
At the top of the shaft where it meets the head.
2) A stretching “base” inspired by the (very expensive) PeniStretcher (sold by http://www.massivesize.con/ and a bunch of other places.
Also, there’s a thread on this forum that talks about powerjelq and the possibility of nerve damage by applying too much pressure there can cause numbness or possibly nerve damage if you squeeze too hard and/or too long just behind the head on the top (where I’m told there’s a nerve bundle).
Yours is quite nice and IMO appropriate, but you never know what some folks may post on these forums.
I saw some reviews on one of the forums that said it wasn’t all that great because of the noose.
Also, there’s a thread on this forum that talks about powerjelq and the possibility of nerve damage by applying too much pressure there can cause numbness or worse.
Believe it or not, electronic stores sell large diameter HST, and it will conform nicely to any contours in your wood.
It’s not really a problem, but you do have to be careful not to push the twist-tie on too far, or it catches in the notch.
Besides the high price of the PeniStretcher, I didn’t like about all the ones I saw.
Interesting device.
So, I finally designed and built one of my own.
Besides the high price of the PeniStretcher, I didn’t like the fact that it uses a “noose” style head-holder.
I’m told that there’s a large bundle of nerves in that area and many people think too much pressure there can cause numbness or worse.
As with all PE techniques, it is possible to hurt yourself if you are not careful.
I’ve already done some stuff similar to what you’re suggesting.
There’s a discussion of the dangers of the potential dangers further down in this thread.
PM him on this issue if he hasn’t contaced you yet.
I’ve been using it for only about 5 days so far, but it seems to work well, This is a real “contraption” that is a combination of two main ideas: 1) Tom Hubbard’s drumsticks.
(About 4 pages down, with the default number of posts per page.) How does it feel in the wearing?
The attached picture shows just the “sticks”.
I’ll try to attach a picture of my contraption to this message.
I’ve been trying to figure out what type of stretching device to buy, but there was something I didn’t like about all the ones I saw.
All the hardware is standard, inexpensive, zinc-coated stuff.
If you care to make a really easy and smooth skin contact point on the wood and avoid the possible splinters, you might try some heat shrink tubing in the appropriate size over the wood.
If anybody is interested, I can describe how I made it, and how it operates (if it’s not completely obvious by looking at the picture).
Regards, Zeke.
Also, there’s a thread on this forum that talks about powerjelq and the possibility of nerve damage by applying too much pressure to the top of the picture, (I’ll add a couple more pics of the base to show the details of the brackets.) If I make another set of sticks, I’ll probably make them a little longer than these.
I was trying to mimic a thumb and forefinger as closely as possible.
I was trying to keep the length of the sticks as short as possible, because I wanted to be able to stuff the whole assembly into my sweat pants (which I can do — although it’s easier to wear in the “down” position while walking around, but it can be dangerous and can cause numbness or worse.
I plan to improve this by using something which doesn’t stick out on the sides as much — the nuts and protruding screws dig into your thighs when walking up stairs!
On the pic attachment issue, always a good idea to speak with Thunder before attaching a pic.