New Stretcher Contraption
I originally wanted to use rubber tubing instead of the clear plastic stuff, but couldn’t find any.
You can see that I used a rasp to shape the sticks to give some “relief” (I guess that must be similar to a bastard file?
Also, please realize that I’m a PE beginner — I am inexperienced in this area, and I am learning/experimenting as I go along.
Also, have added some sketches to the bottom of the sticks.
(About 4 pages down, with the default number of posts per page.) How does it feel in the wearing?
This is my first time posting here, so I don’t know if I can find some the right size.
Thanks for the feedback, groa and ThunderSS.
Maybe for long wearing, some type of foam/tape/padding might be a better choice.
They’re made of 1/2 inch hardwood dowels.
This seemed to have done the trick.
It’s made completely of inexpensive parts available from any decent hardware store (I got all the parts at the local ServiStar).
Thanx and keep us posted on the progress with this device.
It’s not really a problem, but you do have to be careful not to push the twist-tie on too far, or it catches in the notch.
If you care to make a really easy and smooth skin contact point on the wood and avoid the possible splinters, you might try some heat shrink tubing in the appropriate size over the wood.
Hi Everybody, I’ve only been reading about PE for a few weeks now.
The hinge end of the sticks as short as possible, because I wanted to use.
(I’ll add a couple more pics of the base to show the details of the brackets.) If I make another set of sticks, You can see that I didn’t leave a whole lot of room for the twist-tie.
As with all PE techniques, it is possible to hurt yourself if you are not careful.
Once I ran across Tom Hubbard’s web site, I knew exactly what sort of “head-holder” I wanted to be able to stuff the whole assembly into my sweat pants (which I can do — although it’s easier to wear in the “down” position while walking around, but it can be done.
I just slip it on over the ends.
I sanded so the score marks are at 90 degrees to the direction of the pull.
Besides the high price of the PeniStretcher, I didn’t like about all the ones I saw.
I DON’T WANT TO BE RESPONSIBLE FOR ANYONE HURTING THEMSELVES!
I’ve been using it for only about 5 days so far, but it seems to work well, I still wouldn’t mind trying some rubber tubing if I can find some the right size.
If anybody is interested, I can describe how I made it, and how it operates (if it’s not completely obvious by looking at the picture).
I think I would add the foam padding to the dowels and maybe use Groa’s bastard file to kind of get a sweet spot for the top of the shaft near the head.
So, I finally designed and built one of my own.
NEW: Have added a little more to the description of the base, due to questions from a couple of people.
I’ll try to attach a picture of my contraption to this message.
But, I used some medium grit sandpaper and sanded the tubing to “rough it up”.
Pics/attachments like this are fine.
As it turned out, the clear stuff is a little too slippery, and I kept on having to re-adjust it.
(This is also why the shaped wood underneath is hard to see — the tubing isn’t really clear anymore in the sanded section.) Because the tubing has the shaped “relief” part under it, the tubing squishes into the shaped part.
I find this is easy to adjust, and so far, I haven’t even had to replace it.
Here, you can see the notches that I filed into the dowels so that they don’t slip off the metal “pusher brackets” on the base part.
PM him on this issue if he hasn’t contaced you yet.
So far, this seems to work well, and I really like the feeling of using it.
Of course, I have only been keeping it on for maybe 1/2 hour or 45 minutes at a time so far.
I like the idea of the pivot points on the base.
There’s a discussion of the dangers of the potential dangers further down in this thread.
I released his attachment last night Groa.
Regards, Zeke.
I still wouldn’t mind trying some rubber tubing if I can attach more than one picture or not.
With this device there is a distinct danger of putting the “sticks” too close to the head of your penis and squeezing them too hard.
So far, this seems to work well, and I don’t feel the need for any extra padding or wrapping.
I’m told that there’s a large bundle of nerves in that area and many people think too much pressure to the top of the shaft where it meets the head.
It’s a little hard to see the exact shape, because I covered the shaped part with some clear plastic tubing.
Don’t get carried away and rip your “willie” off your body!
:jumpred:WARNING — AND A “DISCLAIMER”: Please be careful using this device!
2) A stretching “base” inspired by the (very expensive) PeniStretcher (sold by http://www.massivesize.con/ and a bunch of other places.
Yours is quite nice and IMO appropriate, but you never know what some folks may post on these forums.
Or, maybe what I’m using IS a bastard file?).
If you want to post a couple more, showing more detail, I’ll post a couple more, showing more detail, go for it Zeke.
I saw some reviews on one of the forums that said it wasn’t all that great because of the noose.
This seems to provide just the right amount of “give” to hold firmly but not too tightly.
I was trying to mimic a thumb and forefinger as closely as possible.
groa Hey Zeke, Welcome aboard!
I’m new to this stuff, you know!
Seriously — use caution and moderation — stretch safely.
I’ve been trying to figure out what type of stretching device to buy, but there was something I didn’t like about all the ones I saw.
Let us know how it works for you.
On the pic attachment issue, always a good idea to speak with Thunder before attaching a pic.
Also, this gives an instant release — just pull it off the end.
The attached picture also shows my method of keeping the sticks closed: a simple twist-tie!
Interesting device.
I’ll post a couple more pics of the base to show the details of the brackets.) If I make another set of sticks, I’ll probably make them a little longer than these.
Believe it or not, electronic stores sell large diameter HST, and it will conform nicely to any contours in your wood.
The attached picture shows just the “sticks”.
Now, hopefully, it will be an effective device!
The stretcher described in this thread is capable of generating some really strong stretching forces.
This is a real “contraption” that is a combination of two main ideas: 1) Tom Hubbard’s drumsticks.
Either that or rotate the attachment points to contact the sides of the shaft.
As I’ve been warned by guys much more experienced than me, you must be careful about applying too much pressure to the top of the shaft where it meets the head.
Besides the high price of the PeniStretcher, I didn’t like the fact that it uses a “noose” style head-holder.