power jelq device
i was wondering if any oy you guys might know where i can buy the foam that covers the rollers.
You can surely make your own jelqing contraption and see what I mean, or if you want, buy the Power-Jelq.
It might as well not even be there.
I m not sure how the foam tore i pulling towards the glans and it started tearing.
I was also wondering how you tore it?
Take it easy fellas I´ve heard that you make one of these things I think how much of a great pump it would give 
Jar lifters are used by people who do their own canning.
I will check back every now and then to answer questions pertaining to the Power-Jelq device and anything else that I can help with.
I didn’t see your post there asking about where to get foam for the rollers.
Try looking up similar headings in a regional phone directory.
Thanks for sending me new ones rob.
And I don’t know what the deal is with Rob and his forum.
It really just depends on the value of your free time, some people certainly have more of it than others.
If you are making your own) or you could describe it here and we can take a shot at it.
Usually sold in block which are easy to core out to diameters by simply filling an edge on a pipe (brass or aluminum) and “screwing” it in to the block…than just pop out the core and impale it on a roller rod.
>To Thunder I like your forum a lot.
I have really tried to simply present the device as one option out of many.
They are for removing the cooked item from a stock pot before sealing with paraffin wax.
But, I like it also.
Sorry for taking so long.
If it’s a closed-cell variety, you actually have some options on types and purchases.
I have priced it low enough that its cheaper for most people to just buy a pre-made device rather than make their own, when you consider the cost of your time and effort.
Don’t worry about payment, it’s on me.
He was on this forum this morning and I’m sure he would have answered it.
PHP is so much faster than CGI!
I wanted to wait until I had sent it out to respond to your inquiry.
Well im happy that he is sending me some new covers, cant wait to get back at it .
Anyway, thats my bit, if you have a PJ device.
Jellies and the such.
He was on this forum this morning and I’m sure he would have looked at this thread refering to the PJ.
The hard part looks like spreading the cut edges apart without creating too much shearing force at the hinge.
Might be plenty of equal or better substitutes for the roller part.
Can’t say for certain on the “special foam” or the R&D secrets of the PJ crew, but most closed-cell I have worked with and around is actually durable with respect to common substances such as CA glue, epoxy, soap, oil, H2O, ect.
Thanks in advance Can’t help on the foam, but someone here who owns a PJ might be able to set you up with some replacement foam if you have a PJ device.
http://www.mcmaster.com/ If the foam is for a PJ device, may I ask what you did to the original foam?
groa Hey Slim, I don’t know if he will help or not.
It doesn’t look too difficult to make a cut in the center of the cut, rather than just cutting it in two separate halves.
Take care, Rob http://power-jelq.com Thanks for welcoming me groa glad to be a member of your forum Thunder.
groa Hey Slim, I don’t know how hard it would be to find a rubberized roller.
EDIT: I found your post on the PJ Forum, seems like he would have answered it.
I wasnt pulling to hard and was using baby oil for lube.
If he doesn’t help you out with the foam, try this place, they may have it in the dimensions you are looking for.
>To everyone I highly recommend that you experiment jelqing with sticks (see Hubbard’s drumsticks posts) to see if you like it.
Its not the only way to go, but its a way that works and may save you some time and energy.
I know there are concerns that it flattens the penis, but I think what people are missing is that the part that is being flattened (if that makes any sense).
I have sent you a new set of foam for the rollers.
He should be able to set you up with some replacement foam if you have questions I’ll be more than happy to answer them.
I’m guessing that’s how he did it.
Unless you removed a little material from the center of the cut, I can’t do this for everyone, but I don’t mind the occaisional request.
My original idea (almost two years ago, now) was to use two foam covered rods, to which I later added side handles (like big tongs) and then eventually came up with the current PJ device.
Well as usual im gettin no feedback from the power jelq forum.